AD series homogeneous dispersing machine are powered by micro motors of compact-structured excitation type, it can be widely used in the mixture of low, moderate or high viscosity liquid in the lab or test workshop.
1, Adopt internal suction homogeneous structure with high speed. It can be used to efficiently homogenizing and emulsifying two immiscible liquids, extracting trace organic compounds, lipid soluble substances and organic solvents soluble substances.
2, The small lab homogenizer is portable.
3, All kinds of animals and plants tissue can be homogenized and mixed.
4, Can make the cell membrane rupture to nuclear separation, and can be used at different speeds to break the DNA strand, or macromolecule material broken into small molecules.
5, Low speed can be used as a mixer.
6, Rotating speed digital display, intuitive readings.
|Rated Voltage||220±10% VAC|
|Rated Frequency||50/ 60 Hz|
|Input Power||850 W|
|Output Power||500 W|
|Rated Torque||1.78 N·m|
|Speed Control||Stepless Control|
|Speed Range||5000 ~ 28000 rpm|
|The Material of the Operating Head||Stainless steel 316L #|
|Standard Configuration||18 G|
|Diameter of working head||φ18 mm|
|Speed Of The Rotor||15 m/s|
|Mixing Capacity (H2O)||50-1500 ml|
|Max. Suitable Viscosity||2000 cP|
|Min./Max. Immersing Height||45/160 mm|
|Size Of The Mixer (T×B×H)||215 × 310 × 720 mm|
|Permissible Ambient Temperature||Lower than 40ºC|
|Permissible Relative Humidity||Less than 80%|
|1||Heterogeneous host||1||5||Supporting and fixing frame||1|
Optional Working Head
( The operating head in the main picture is just for reference. The outlook of the operating head is different depending on your choice. )
1, Put the Base (6) on the platform, connect two supporting stand (7) by screwing them together before fixing it into the Mounting hole in the base. Set in the Supporting and fixing frame (8) on the upper end of the supporting stand, and turn the handle to fasten them.
2, Connect the short Beam (9) to the dispersing host electric motor through the Mounting bolt hole at the back of the motor, then insert the Beam into the Supporting and fixing frame, and turn the handle on it to fasten the motor on the supporting stand. The host motor can be adjusted on the Supporting and fixing frame freely.
3, When installing the operating head, follow the steps in Use and Maintenance 4-5.
·To ensure the running safety of the product, fix the key points of connections firmly and inspect it regularly.
·Before testing or operating the product, please read the Use and Maintenance carefully.
·Operate the product on the Base and NO hand operation.
·The product can't be put into use in a flammable and explosive environment.
·Ensure a good grounding for the Input power supply socket. It's strictly prohibited to connect the grounding with telephone lines, metal pipes or lightening arresters.
·There must be enough space between the end of the operating head (feed inlet) and the experimental medium container, and the liquid level of the medium must be below the overflow hole of the operating head.
·Before entering the power of this machine, please carefully check if the power switch (3) on the speed controller is turned off, speed control knob (2) is in the starting position. Avoid the Power Input of emulsified host suddenly started, personal injury caused by operator and laboratory equipment, laboratory material and other damage.
This product was straight forward to use, fast and consistent, and the instruction which came with the product was detailed and informative and easy to follow for high quality consistent results.
This instrument is extremely easy to use and quickly providing high quality and consistent results when compared to older mixer. It has been really helpful for my research. The support rep has been very responsive to questions and I was satisfied with the prompt response.
The product performs as described, it takes up little bench top space in our laboratory. I can't imagine not having this product in my lab. And the customer service support is one of the best in the industry.
I purchased this AD500S-P lab homogenizer and was very pleased with the final results. It is an very affordable price for daily laboratory homogenizing and dispersing. This reliable equipment is very well designed and produce very accurate data. Interface is easy to use and navigate. It is highly recommended!
I should show great respect to the seller. I told her to buy a lab homogenizer to emulsify facial cream but do not know which homogenizing head to use. She analyzed my date (volume, supply voltage etc.)and recommended the best suitable one: 12G homogenizing head. Thanks very much for it.