Kos-130 5.5KW Chemical Ink Mixer Emulsifier, High Shear Homogenization Machine

Item Specifics:

Product Description:

High shear mixer disperses one phase or ingredient (liquid, solid, gas) into a main continuous phase (liquid), with which it would normally be immiscible. A rotor together with a stator is used either in a tank containing the solution to be mixed, or in a pipe through which the solution passes, to create shear. The products could be widely applied in cosmetics, food, beverage, chemical, pharmaceutical, paint& ink industry etc. Four types of different stators are suited to different working conditions.

Equipment Performance and Features:

1, High shear homogenizer can be used with mixer, tank reactor and other equipment, the key is that high shear emulsifier is applicable used in the pre-treatment stage for the process of mixing materials;

2, Compared with the traditional emulsifying machine, the high shear homogenizer has been improved in the structural design, which improves the processing capacity and reduces the energy consumption of the processing, especially suitable for high-volume production and processing industry;

3, High value of use, in operation can be achieved for a long time continuous production work;

4, High efficiency, shorten production and processing time;

5, 360 degrees omnidirectional without dead ends mixing body design, material can be 100% dispersed and emulsified in process;

6, During operation, low power, even in the long run, the machine can always maintain a good stability performance.

Application:

KOS factory has many years' experiences in supplying high shear mixer for traditional liquid inks. Raw materials such as resins, polymers plasticizers, dyes, conductive salts and pre micronized pigments are used in ink formulations. But when added to the base liquid, some ingredients of these raw material can form agglomerates that traditional agitators cannot break down. Instead of traditional agitator, using a KOS high shear homogenizer can easily solve this problem and dramatically reduce processing time.

Before you place an order, please contact us, we can custom make emulsifying homogenizer machine for all your request.

Notice:

1. What kind of material do you want to process?

2. What's the capacity?

3. What is it used for? Mixing, dispersing, shearing or homogenizing?

Technical Parameter:

Different Types of Workhead:

Notes During Installation:

1, The machine of machine length (L) size for the standard length, if must be extended or shorten will be separately with manufacturing.

2, The best position selection of mechanical length for emulsification box slot in effective liquid surface 60% for best deeply.

3, Emulsifying machine please reference: the selected capacity, the viscosity, the processing time, reaction temperature, purpose, address the company business department.

4, Emulsifying machine ba-alloyed bearing the water since embellish type bearings, forbidden liquid below the water bearings with, to avoid creating start-up equipment bearing damaged.

5, Correct parameters to provide the kind prevail, data such as are subject to change without prior notice.

Maintenance

1, The emulsifier finished work should be promptly cleaned, immerse the work head into clear water or organic solvent, start the emulsifier to remove the retentive completely.

2, A long time not in use, you can disassemble the work head, drain the water, add lubricating grease in the sliding bearing.

3, The mixing head is strictly prohibited running out of the materials, so as not to damage the bearing.