Kos-180 18.5KW Ointments High Shear Homogenizer Pharmaceutical Emulsification Equipment

Item Specifics:

Product Description:

High shear mixer disperses one phase or ingredient (liquid, solid, gas) into a main continuous phase (liquid), with which it would normally be immiscible. A rotor together with a stator is used either in a tank containing the solution to be mixed, or in a pipe through which the solution passes, to create shear. The products could be widely applied in cosmetics,food, beverage, chemical, pharmaceutical, paint& ink industry etc. Four types of different stators are suited to different working conditions.

Features:

Pollution-free to materials;

Good and stable emulsions and shear performance;

Lower energy consumption;

All wetted parts are grade 304 or 316 stainless steel;

Quick opening for easy cleaning;

Mechanical seal for sanitary operation;

Application:

Pharmaceutical ointment can be either a water-in-oil or oil-in-water emulsion, consisting of waxes, emollients and lubricants dispersed in an oil phase. When adding ingredients to the water, it easily forms agglomerates, which traditional agitators do not rapidly break down. Instead of agitators, high shear mixer of KOS factory can be used to dissolve these agglomerates rapidly and properly and minimize aeration in the process.

Before you place an order, please contact us, we can custom make emulsifying homogenizer machine for all your request.

Notice:

1. What kind of material do you want to process?

2. What's the capacity?

3. What is it used for? Mixing, dispersing, shearing or homogenizing?

Technical Parameter:

Different Types of Workhead:

Notes During Installation:

1, The machine of machine length (L) size for the standard length, if must be extended or shorten will be separately with manufacturing.

2, The best position selection of mechanical length for emulsification box slot in effective liquid surface 60% for best deeply.

3, Emulsifying machine please reference: the selected capacity, the viscosity, the processing time, reaction temperature, purpose, address the company business department.

4, Emulsifying machine ba-alloyed bearing the water since embellish type bearings, forbidden liquid below the water bearings with, to avoid creating start-up equipment bearing damaged.

5, Correct parameters to provide the kind prevail, data such as are subject to change without prior notice.

Maintenance

1, The emulsifier finished work should be promptly cleaned, immerse the work head into clear water or organic solvent, start the emulsifier to remove the retentive completely.

2, A long time not in use, you can disassemble the work head, drain the water, add lubricating grease in the sliding bearing.

3, The mixing head is strictly prohibited running out of the materials, so as not to damage the bearing.