NX Thick/ Thin Mixing Tank
It is mainly used for the large transfusion, small injection as well as solution, sterilization and preparation etc.
1. The series of equipment hava the functions of heating, cooling, heat preservation and mixing preparation. The vessel carries out design and processing according to "Technical condition for steel made pressure vessel".
2. The specifications for selection are 0.05m3-5.0m3 different volumes. It can also carry out the design and processing according to the actual technology requirements of customer.
3. Adopt interlayer structure, with the advantages such as large heating area and small welding etc.
4. The shaft seal adopts sanitary level hard alloy and silicon carbide 204 balancing mechanical seal, which is anti-abrasion and anti-press. The rotation speed is 60-82r/m, and the speed can also be regulated by frequency converter.
5. The interface adopts internationally generally-use standard ISO standard rapid installation chuck type, and the material is imported 316L or 304L. The mirror polishing of internal surface<0.28um, and the external surface adopts semi-luster polishing or mirror polishing treatment.
6. The liquid meters of selection are glass tube liquid meter, static pressure sensor type liquid meter and supersonic wave liquid meter.
7. The structure forms are divided into upward and downward round sealing head and downward reverse convex bottom upward round sealing head structure, which can guarantee no residual of liquid medicine.
8. The jacket structure forms of selection are divided into standard jacket , external coiled tube jacket, and honeycombed jacket. The structure is the combination of upward and downward round sealing head and standard layer jacket. It has large jacket space and large heating area, which can reduce the welding seam. The internal bladder is neat, which can guarantee that the material will not be hung on the wall. It has advantages such as beautiful appearance, simple structure and durability. The disadvantages is that it is too high. Additionally, if changing the reducer as horizontal worm gear reducer, the height can be reduced for about 250-330mm.
We purchased this great equipment with some other additional accessories, pretty useful and doesn't present any issues compared to other rivals. This is good equipment and is affordable. Cost efficient compared to other automated emulsifying equipment. Small footprint can fit in plants that have limited spacing.
We are new to this homogenizing industry and want to buy a homogenizer to emusify onitment with cooling and heating process. We provided relevant and detailed information, they suggested a complete plan with how to deal with our special material based on our situation. We trust their professions and thank you.